- This topic has 1 reply, 1 voice, and was last updated 3 years, 10 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Today’s mission… Spruce up the engine bay, there was a gap under the wood which has been filled and filleted, about to add biaxial cloth tabbing and then a polite coat of brilliant white epoxy paint, really productive day
Attachments:
First coat of paint is curing, lessons learnt:
1.polyester fumes have nothing on this stuff, the purple llamacorn agrees.
2. Paint the back of confined spaces first.
3. Make sure the chosen roller reaches the narrow sections before activating expensive paint and crawling into previously mentioned confined space.Attachments:
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.