Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #6670
    Steve Wayne

      Can anyone tell me how to remove the throttle handle?
      My restoration project is a 1984 Sea Ray. The handle seamed a little bit loose so I decided to take it apart to see if I could get it to work smoother.
      I removed the plastic covering from the handle that was tapped on holding it together. It seams to have what looks like a plastic snap ring on the bottom of the handle. It is not wanting to come off. I do not want to break anything. Does anyone now if I am going about this the wrong way?
      Or is there a better way to remove this throttle handle?
      Answers are appreciated,
      Mr Steve

      Steve Wayne

        That I do not know, I am learning more about this boat as I get into the restoration of it. I did learn that my question I ask was called the wrong thing. The correct item I am trying to get off is called the
        “shift/throttle lever” by the steering wheel.
        my mistake
        I will get a picture and post it later

      Viewing 2 posts - 1 through 2 (of 2 total)
      • You must be logged in to reply to this topic.